After you got the generator, please read the operation manual carefully.
After receiving the genset, follow these steps:
Inspect: Check model, accessories, and for any shipping damage.
Prepare site: Place on a flat, well-ventilated, dry area away from flammables.
Fill fluids: Add engine oil, diesel, and coolant as per manual (no fluids from factory).
Connect battery: Tighten terminals and check electrical connections.
No-load test: Start the genset, check voltage, frequency, and oil pressure.
Load test: Gradually apply 50–75% load for 30 minutes. Stop if any abnormality occurs. Contact us for support.