< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1413824017045502&ev=PageView&noscript=1" />
Jiangsu Kaichen Power Equipment Co., Ltd.    Email: cnkcpower@163.com    +86-18012341322    Dinghuo Industrial Park, Jiangdu District, Yangzhou City
Official Media ▼
2026-11-13 18

Kaichen KC-W100ZYL 100kW Open Frame Generator with Weichai WP6D

An open frame still makes sense at 100 kW

The assumption that anything above 50 kW belongs in a canopy is wrong more often than right. An open-frame set is cheaper, lighter, easier to inspect and faster to repair, and at 100 kW those advantages still hold where the machine stands indoors, in a service bay or under a roof that already provides weather protection.

What the open frame gives up is acoustic attenuation and weather resistance, and those are installation problems rather than generator problems. A buyer who understands the trade can get a 100 kW set into a workshop for materially less money than the canopied equivalent, provided the room is ventilated and the exhaust is piped properly.

KC-W100ZYL: 125 kVA and 201 A on the plate

The delivered unit referenced here is a KC-W100ZYL dispatched on 27 October 2026 to an individual buyer. The set plate reads 125 kVA and 100 kW, 400/230 V, 201 A per phase, 1500 r/min, power factor 0.8, 50 Hz, to GB/T 2820.5-2009, with a set mass of 1100 kg and serial 202610054, produced November 2026.

The 201 A figure is the one to quote when ordering cable and a changeover switch, because a 100 kW set at 400 V draws about 144 A at full resistive load and 201 A at the plate's 0.8 power factor. Sizing the installation on 144 A is a common error that shows up as a warm cable and a nuisance trip at the first full load.

Weichai WP6D132E200 behind a 100 kW rating

The engine is a Weichai WP6D132E200 with order number DHP06D0633-000*01, produced 28 September 2026, net mass 680 kg, serial 6P26J034995, rated 120 kW at 1500 r/min and 132 kW standby at 1500 r/min, built to China non-road stage four by Weichai (Weifang) Medium-Duty Diesel Engine Co. at Wei'an Road, Weifang.

That is a 20 per cent margin over the 100 kW electrical rating, which is generous for an engine of 6 litre class and is the main reason this configuration can carry a workshop load continuously rather than only in standby. It also explains why the consuming public sees this set described as a 120 kW engine on a 100 kW genset.

LIRASEMA LMI-100 and the brushless choice

The alternator is a LIRASEMA LMI-100: 100 kW, 125 kVA, 400/230 V, 180 A, excitation 40 V, IP23, class H, 1500 r/min, power factor 0.8, 50 Hz, produced November 2026. A brushless machine at this rating removes the slip rings and the brush wear that dominate maintenance on older excitations.

The practical benefit is that a workshop can leave the set for months and expect it to excite on the first start. Brushed machines often need the rotor surface cleaned after a humid season before they will build voltage, which is the kind of fault that appears at the worst time.

Where the open frame wins, and where it loses

It wins indoors: faster access to filters, belts and the battery, no canopy panels to remove, no louvre to clean, and a lower purchase price for the same electrical capability. It also wins on transport, because 1100 kg on a base frame loads into a small truck without a crane.

It loses outdoors and near people. Rain reaches the terminal box and the control panel, and the unattenuated engine noise at 1 m is a different order of magnitude from a canopied set. Where the machine must stand outside or beside an occupied area, the canopy is not an accessory but the reason the installation is acceptable.

Indoor installation carries its own requirements rather than none. The room needs a permanent air path sized for the radiator, an exhaust that discharges outside the building, and a bunded floor if the tank sits beside the set. A workshop corner with a closed door and no louvre will run a 100 kW set hot within an hour, whichever frame it sits on.

Portable at 1100 kg: transport and siting

A 1100 kg set is movable with a forklift, a pallet truck on a hard floor, or four people on rollers for a short distance. That matters to an individual buyer who may need the set at one site this season and another the next, and it is a genuine advantage over a canopied equivalent that needs a crane to reposition.

For a rental or contracting buyer the transport argument is usually the deciding one. A set of 1100 kg on a base frame lifts onto a flatbed with a small forklift, needs no crane at either end of the journey, and can be repositioned on site without a rigging crew. Those savings repeat every time the machine moves.

Fuel, filters and the single-buyer case

At 100 kW and 70 per cent load the set consumes roughly 19 to 23 litres per hour, so a 200 litre day tank covers a working day. For a single buyer without bulk storage, the filter discipline matters more than the tank size: a water separator drained weekly in humid weather prevents most injection problems.

The engine takes the ordinary consumables, and the sensible order includes two spare fuel filters and a spare water separator element with the machine rather than after the first blockage. Spares bought with the set cost less than spares bought in a breakdown, and they remove the waiting time that dominates the repair.

Acceptance checks for a workshop installation

Before first start, confirm the set is level on a firm base, the exhaust is piped away from the intake, the battery is charged and the fuel line is primed. Then load it in steps to the workshop's measured maximum demand and watch the voltage and frequency recovery, not only the meter readings at steady state.

A clamp logger on the main for a week is more informative than a nameplate survey, because it captures the simultaneous demand the workshop actually creates. Sets are usually blamed for faults that are really an installation asking for more than the plate allows, and a week of recorded data settles that argument quickly.

Why Jiangsu Kaichen for open-frame sets

Jiangsu Kaichen Electric Power Equipment Co., Ltd. has manufactured generator sets since 2013, with stated annual capacity of 8000 units and more than 20000 delivered in three years, holding ISO 9001, ISO 14001 and ISO 45001 certification, CE Machinery Directive conformity and OEM authorisation for the engines it assembles. Terms are FOB Shanghai, 30 per cent T/T deposit, balance before shipment, 7 to 15 working days for single units. Enquiries: cnkcpower@gmail.com or WhatsApp +86 180 1234 1322.



Home
Products
Contact

Get a free quote

Captcha